What is a Decibel?
Decibal is the unit used to express relative differences in signal strength.
It is expressed as the base 10 logarithm of the ratio of the powers
of two signals:
dB = 10 log (P1/P2)
Signal amplitude can also be expressed in dB. Since power is proportional
to the square of a signal's amplitude (e.g., a power ratio of 100 is equivalent
to an amplitude ratio of 10), dB is expressed as follows:
dB = 20 log (A1/A2)
Logarithms are useful as the unit of measurement because (1) signal power
tends to span several orders of magnitude and (2) signal attenuation losses
and gains can be expressed in terms of subtraction and addition.
For example, suppose that a signal passes through two channel segments is
first attenuated in the ratio of 20 to 1 on the first leg and 7 to 1 on
the second. The total signal degradation is in the ratio of 140 to 1. Expressed
in dB, this becomes 13.01 (10 log 20) + 8.45 (10 log 7) = 21.46 dB.
The following table helps to indicate the order of magnitude associated
with dB:
1 dB attenuation means that 0.79 of the input power survives
3 dB attenuation means that 0.50 of the input power survives
10 dB attenuation means that 0.1 of the input power survives
20 dB attenuation means that 0.01 of the input power survives
30 dB attenuation means that 0.001 of the input power survives
40 dB attenuation means that 0.0001 of the input power survives
Randy H. Katz, randy@cs.Berkeley.edu, Last Updated: 29 December
95